The JCB Fastrac 4160 is perfectly suited to a wide variety of applications in grassland, arable, haulage and livestock operations alike. Look no further for the best return on investment.
Compare Fastrac with conventional tractors and you’ll find that JCB tractors offer faster in-field speeds, greater load carrying capacity, quicker headland turns and faster transfer speeds, potentially saving several working days a year.
Turning at the headland is much faster with four-wheel steering and a minimum turning circle below 10 metres.
Carry an extra 2.25m³ of seed on the rear deck to reduce drill refilling stops to once per day. Put the drill hopper up front for ultimate capacity, 50:50 weight distribution, and scope for using wider power harrow-seed drill combinations.
Use the 4-tonne capacity rear deck to carry 2.5 tonnes of fertiliser for improved weight distribution and an extra 10ha between fills. Combined with faster return-to-base fill-ups, you could achieve an extra hour’s productive work daily.
You can gain two-thirds more spray tank capacity with these tractors by ditching the 1500-litre linkage sprayer for a 2500-litre demount. Or go large with a front-linkage tank for up to 4000-litre capacity.
The JCB Fastrac 4160 is a real Swiss Army knife of tractors in a small but powerful package. Make use of five implement positions, including the chassis for a front loader, to do more operations in one go.
Maximum permissible vehicle weight is up to 30,000 lb (depending on territory/configuration) with the ability to mount up to 8,800 lb on the rear deck. So these tractors can carry loads more, with bigger implements and fewer refills.
A flow-on-demand closed centre hydraulics system ensures there’s plenty of oil for every situation. An axial piston pump provides up to 39 gallons per minute for auxiliary services, while a separate gear pump ensures a dedicated supply to the steering system.
There’s a three-point linkage system on the Fastrac 4160, featuring up to 17,600 lb lift capacity with new geometry ensuring plenty of muscle and lift for large implements. Front linkage capacity is now boosted to 7,716 lb.
Extend your productive day with the optional LED work light package, comprising up to 18 lamps to provide near-daylight visibility even at night.
Another way of increasing the working envelope is to opt for fully-integrated high definition GPS guidance. This will boost precision, output, bout matching and operator energy levels, as well as allowing work to continue at night or in low-visibility conditions.
A Sisu 6.6-litre six-cylinder Tier 4 Final engine provides the JCB Fastrac 4160 with proven fuel efficiency, a maximum 175hp (130kW) of power and 750Nm of torque. The whole driveline offers plenty of grunt at low revs, maximising performance and efficiency.
CVT transmission ensures optimum use of power and torque, with seamless acceleration and power delivery, ideal speeds for every situation, and ultra-fine speed control for top-quality work with all implements.
Tailor your transmission and engine control strategy using the Fastrac’s touch screen controller – prioritise power and productivity, fuel economy, fixed engine/PTO speed or fuel-efficient road travel.
Active Traction manipulates your tractor’s torque output to keep the tyres gripping for maximum pulling power with minimum wear.
The Adblue and SCR emissions system used on these tractors is fuel-efficient technology that’s been tried and tested on other models in the JCB Fastrac range.
JCB Fastracs are fast on the road and in the field at low engine revs: cruise at 60km/h at 1600rpm or drive for maximum fuel economy at 50km/h with just 1400rpm on the clock (tyre dependent).